Fits where gensets can't
Compact footprint for urban shops, rooftops and tight retrofits. No exhaust routing, no fuel storage.
FlexiPod is a single-phase battery energy storage system built to take the place of a diesel generator. Clean, silent backup that charges from the grid or solar and switches over before your equipment notices.

India's commercial sites run on DG sets as backup. Once fuel, maintenance, idling and wear are counted, a genset delivers power at more than ₹30 per effective unit at current diesel prices. Stored power from FlexiPod costs ₹8-10 per unit. Over 5 years that is about half the cost of running a genset, with payback in under 2 years.
Grid and solar charge FlexiPod. When the grid drops, FlexiPod carries your loads in priority order. Critical circuits stay on, flexible ones defer. FlexiTwin watches every unit and schedules charging around your tariff.
Compact footprint for urban shops, rooftops and tight retrofits. No exhaust routing, no fuel storage.
No warm-up and no lag. Servers, POS and compressors ride through outages.
Capture daytime solar and use it after dark. Reduce dependence on the grid and on diesel.
Start with the capacity you need. Add modules later without ripping out infrastructure.
Designed and tested in India for heat, dust and vibration at commercial and mobile sites.
Live state of charge, load, outage history and alerts through FlexiTwin, on web and mobile.
| Inverter rating | 8.5 kVA, single phase |
|---|---|
| Three-phase version | Coming soon |
| Grid input | 180 to 280 V AC, 50 Hz, single phase |
| AC output | 230 V AC (210 to 240 V), 50 Hz |
| Output ports | 1 × 32 A industrial connector, 2 × 16 A 3-pin sockets |
| Peak output | 11 kVA |
| Battery energy | 10.5 kWh (10-12 kWh configurations) |
| Chemistry | Lithium iron phosphate (LFP), 48 V, prismatic cells |
| Battery capacity options | 100, 200 or 230 Ah at 48 V |
| Charging current | 30 or 60 A, selectable |
| Cycle life | 3,500+ cycles rated; warranty covers 2,500 cycles at 80% depth of discharge |
| Changeover | Under 20 ms |
| Enclosure | IP65 |
| Protection | 70 kA surge protection on input and output, 40 A overload protection, RCCB earth-leakage protection |
| Display and alarms | 3.5-inch LCD, error codes and buzzer |
| Warranty | 5 years standard |
| Charging sources | Grid, solar (DC or AC coupled), or both |
| Installation | 1 to 2 hours, no civil work |
| Monitoring | FlexiTwin cloud, web and mobile app |

Refrigeration, POS and security stay on through outages. No spoiled stock, no lost billing hours.

Buffer charging demand without overloading the grid connection or paying for upgrades.

Clean power for pumps and cold rooms where the grid is weak or absent.

Silent, instant power for clinics and mobile medical units. No fumes near patients.
A few live FlexiPod sites. See more on customer stories.
FlexiTwin monitors every FlexiPod live: charge, load, faults and outages. Our team sees an alert before you notice a problem.
Most issues are diagnosed remotely and many are fixed with a settings or firmware change, without a site visit.
When a visit is needed, our service network covers 60+ cities. Response times are agreed by city in your contract.
For most backup loads, yes. FlexiPod replaces gensets at shops, clinics, offices, QSR outlets and dark stores. No fuel runs, no noise, no fumes, and changeover happens in milliseconds rather than the 5 to 10 seconds a genset needs to start.
A standard installation takes 1 to 2 hours. Our team does the site assessment, installation, grid integration and commissioning. You need a level surface and an electrical connection point. No civil work.
If you run a diesel genset today, you are probably the right size. Use the backup calculator with your actual appliances, then send us the list and we size the system properly.
Yes. FlexiPod charges from solar during the day, the grid at night, or both. We support DC-coupled and AC-coupled setups depending on your existing installation.
Runtime depends on load. At a 10 kWh battery powering 2 kW, expect about 5 hours. When charge drops to 20% the system alerts you and can shed non-critical loads. If the outage continues, it shuts down gracefully to protect your equipment.
Yes. FlexiPod uses LFP (lithium iron phosphate) chemistry, the safest lithium battery technology. It produces zero emissions and zero fumes and runs silently, so it is ideal indoors. The system is IP65 rated, and the BMS watches every cell's voltage, current and temperature, with surge, overload and earth-leakage protection built in.
Upfront cost is in the same range as a comparable genset. Running cost is where it changes: no fuel, no oil changes, no servicing. In our worked example (7 kVA genset vs 8.5 kVA FlexiPod, 1.5 hours of backup a day for 150 days a year, diesel at ₹100 a litre, grid at ₹8 a unit), FlexiPod costs about ₹3.0 lakh over 5 years against about ₹5.85 lakh for the genset, roughly half. Payback is under 2 years, and faster the longer your genset runs today.
No. FlexiTwin monitors every unit around the clock, schedules charging and discharging, and alerts our team before you notice anything. You get a dashboard if you want to look.
Fair question. Our systems run live operations today, including clinics, QSR chains and automotive service vans. TEC has 7+ MWh of energy systems deployed and 2,300+ batteries running across 60+ cities, and FlexiTwin monitors every unit live. Ask us for references in your sector.
Send us your load list. We come back with a sized configuration, ROI analysis and an installation date.